The Seal 26/27 manual consists of data from the original handbook plus reprints of all the Newsletter items in which members have described alterations and additions which they have made. They have been arranged as far as possible into sections and are referenced by author and and subject. The diagrams, where required are printed on separate pages.
Super Seal - A First Report - Harry Wyatt |
Water Under Bunks - K.R. Ralsted |
Fitting Out A Super Seal - Leslie Camber |
Leaks - Makers Reply - Bill Parker |
Seal 26 News - John Baker |
Rudder Blade Angle - Bill Parker |
Hints and Tips - Harry Wyatt |
Rigging Inspection - Proctor Masts |
Questions - John Collings-Wells |
Modificati0ns For Single-handed Transatlantic Ron Preedy |
Answers 1 - Stuart Dandridge |
Fitting Out From Kit - George Howard |
More Answers - Mark Simmons |
Economy Of Effort On Board - Noel Canvin |
Stability - G.A. Sarson |
Webbing Jackstays - Peter Lillywhite |
Handling Downwind - J. Bolton |
Reinforced Pushpit - John Collings-Wells |
Heating - J. Bolton |
Design Analysis - Keel Guides Bob Pinssell |
Heavy Weather - John Collings-Wells |
Headsail Roller Reefing Brian Campbell-James |
Centre Plate Retaining Device - D.E. Whitworth |
Mark 2 - Initial Experience Brian Campbell James |
Corrosion - John Collings-Wells |
Cockpit Locker Leaks Denis Fastnedge |
Cathodic Protection - D. Whitworth |
Keel Box Blues Pat Watkins |
Outboard Engines For The 26 - B Campbell-James |
Super Seal Channel Handicap - Martia Minter |
Chrysler Sailor 250 - Brian Campbell-James |
Outboard Mounting Mods - Fred Sutters |
Problems of A Dryers Out Mooring - Brian Campbell-James |
Outboard To Aboard Diesel Conversion - Colin Leach |
Stowe Trailing Log - Brian Campbell-James |
Spinnaker Jockette - David Ball |
Cabin Pillar - John Collings-Wells |
Some Experiences With A Super Seal Mk 2 Brian Campbell James |
Portsmouth Yardstick |
Keel Mods And Other Things - Dick Landon |
Propeller Installation - Bill Parker |
Rudder Uphaul Strut - Bill Parker |
Chain Plate Fixings |
More Ingenious Mods - Dick Landon |
Chrysler 250 Sailor / Outboard Well - Brian Campbell-James |
Fuel Gauge For Super Seal - Harry Wyatt |
Boarding Ladder - John Ackerman |
More About The Bukh 10 - Brian Campbell James |
Cork Tiles - D.N. Hall |
More On Keel Lifting - Pat Watkins |
Folding Propeller - Harry Wyatt |
Keel Vibration - Alan Burns |
Lifting The Keel - Harry Wyatt |
Stowage On A Super Seal - George Howard |
Plastic Nut Caps - Mike Blewitt |
Seal Keel Noise - Dick Landon |
Dowling Universal Mainsail System Brian Campbell-James |
Keel Lifting Mods - Chris Turner |
Stability And Square Feet - Colin Eden |
Window Replacement -Vernon Pell |
Bukh Anodes - John Ackerman |
Rudder Downhaul - Martin Hopton |
Folding Propeller Screws - John Ackerman |
No More Spills - Martin Bopton |
Portsmouth Yardstick - R. Purssell |
Another Steering Experience P E Watkins |
Builder's Diary - Bill Parker |
Life Without A Proper Bilge - Barry Sprules |
Tiller Rot - Roy Tredennick |
Bukh 10 Hp Engine -Vernon Pell |
3. INDEX OF KEY WORDS
The following is a list of key words that are to be found in the index at the back of the Handbook.
Anchor |
Keel retainer |
Anode bolt corrosion |
Keel vibration leaks |
Anodes |
Locker covers |
Antofouling |
Locker organiser |
Baker leaflets |
Log transducer |
Batteries |
Loo door |
Heating |
Mast raising & lowering |
Bilge pump |
Nut caps |
Bilges |
Outboard exhaust |
Boarding ladder |
Outboard mount |
Boom fittings |
Outboards |
Bukh 10 exhaust |
P Y number |
Bukh belt |
Packing list |
Bukh oil filter |
Pillar in cabin |
Chain plate fixing |
Polish |
Channel Handicap |
Propellers |
Chart locker |
Pushpit reinforcement |
Chart table |
Racing |
Check list |
Reefing |
Cockpit drains |
Rigging |
Cockpit floor locker |
Rigging failure |
Cockpit floor locker |
Roller reefing |
Cockpit locker covers |
Rotostay |
Cork tiles |
Rudder |
Cradle |
Rudder alignment |
Decca |
Rudder blade angle |
Deck paint |
Rudder brackets |
Dodgers |
Rudder downhaul |
Doweling mainsail system |
Rudder maintenance |
Downwind |
Rudder pintles |
Drinks holder |
Rudder sticking |
Drying Out |
Rudder uphaul |
Engine failure |
Running rigging |
Engine tips |
Safety equipment |
Fitting out |
Sail plan |
Folding prop screws |
Scrubbing |
Fresh water system |
Single-handed mods |
Fuel gauge |
Skeg fixing |
Fuel supply |
Spinnaker handling |
Gas system |
Spinnaker set-up |
Gelcoat |
Sprayhood |
Gunwale joint |
Stability |
Heating |
Step table |
Heavy weather |
Stowage |
Inboard conversion |
Stowe log |
Jackstays |
T terminals |
Jib changing |
Tiller rot |
Jocky pole |
Toilet trims |
Keel guides |
Upholstery |
Keel guides |
Vice base |
Keel jamming |
Water system |
Keel lift |
Water under bunks |
Keel lifting |
Weight distribution |
Keel maintenance |
Winches |
Keel noise |
Window leaks |
Windows | |
Wiring |