Boat 'Bits and Pieces' For Sale & Wanted

This page provides members of the PSSA with a facility to advertise marine bits and pieces that they have for sale or that they are on the look-out for.

Ads are removed after 12 months or if I am informed they have been sold.

If you have any marine item you wish to advertise on this web page, then please let me know at:

Please note - there is a charge of £5 for non members to advertise on this page as the PSSA is charged for space on the web server.



Warning To Sellers
Be aware of a current scam whereby offers may be received, usually from overseas, which seem valid until the 'buyer' sends a cheque for more than the selling price than asks for the 'extra' to be deposited in a bank account. If this happens don't pay until the cheque has been cleared. This is not as rare as one may think. In fact a number of sellers on this site experienced this from a number of such 'buyers' but hopefully didn't fall for it.
Do not give your bank details to anyone who appears to be interested in buying your boat - especially from abroad

Warning To Buyers
The PSSA does not guarantee the correctness of any advertisement posted on this web page, or have any responsibility for any litigation that may ensue as a result of a sale

ITEMS FOR SALE

Brand new 220 U/L Lodestar inflatable dinghy

Never used, cost £550 new
Complete with pump, repair kit and accessories
Genuine reason for sale, reasonable offers invited

Charles Clements


posted 2 Jul 08

COCKPIT TENT - Suitable for Parker 21

posted May 08

1. Frame - It was not intended to have one.  It uses for its support, a tie fixing at the boom end and a tie fixing at the backstay(forming the ridge), plus the support from the lifelines, stanchions and pushpit, abeam and astern. 

2.  It has incorporated in it all the heavy duty elasticated tie material and fixings.

3. Measurements:

The Ridge - between the Boom fixing( or the leading edge) and the backstay fixing it is 6 feet long.

Ridge to base of port side and ridge to base of starboard side - this measurement is 5 feet 6 inches for each side allowing the tent to lay over the lifelines and be fixed  at side deck level.

As you look at it flat on the ground  you are looking at a shape which incorporates a rectangle 6 feet by 5 feet 6 inches, plus a triangle on the stern end to allow the stern side of the tent to slope down from the backstay fixing point. 

4. Zips - there 3 heavy duty top to bottom zips for ventilation/access, 1 port, 1 starboard and 1 for the stern.

Price - £140

Contact Clifford Ward at

 

Super Seal 26 Sails

(Posted 29 Dec 07)

I have a set of sails comprising a Genoa, Working Jib and a Main that are surplus to requirements. They may well be the original sails and are obviously not new. If any member can find a use for them, please contact me
 

Jack Powley at

 

Rotostay IV furling system model 415 (5mm forestay). - Posted March 2007

 New 2004. Previous fitted to SuperSeal 26. £150 ono + any postage costs.

 

Down Wind Sail, Rad head Supercruise/Coastal Tri-Radial designed by Kemp -

(Posted Dec 06)

MP-70 1.0 oz impregnated Ripstop Nylon Dark Blue, Aqua,White

Used only once. All sheets supplied + end fittings. Seal 22 now sold, but shute still available  

Cost new £396.00  Will take £300.00 o.n.o 

Contact Wendy or Robin 01726-824965

 

Boom off Super Seal £70.

John Margarson -

 

Cruising chute for Seal 22. Posted Oct 2006

Made by Sanders Sails in 2005 and used once before I got a proper spinnaker.

£350 or offer.

Contact Iain Sutherland 01590 679660.;

 

Spinnaker ,Spinnaker snuffer & sock. Storm jib,

used on SUPER SEAL 27.

Offers please to

or 01790 752611.

Marina Saildrive 5HP. Long shaft. New 2003 Season, l2Volt battery charging, has its own tank so can be used on the dinghy, but also has a 25 litre remote tank for cruising. Always starts and very powerful, will push the Seal 22 into Portsmouth Harbour against the springtide due to the saildrive reduction gearbox. Sensible offer please.

Reason for sale, fitting a small Yanmar inboard.

 Contact Gordon Curret on 01243-572551 or mobile 07901900442 

Alternately e-mail to

Spinnaker sqeezer/snuffer

for a 22-27 ft yacht. Made in 2003 and unused.   Posted 24 Sept 04

£100

Contact Chris Brown at  or 01943 874059

 

Crew Neck Fleece  Posted 1 APRIL 04

    size XL
    colour Claret
    SSA logo on LHS
    Bargin - reduced price, due to wrong order - only £20 !

    Please contact Sue Surplice - 01256 476331 for this and other fleeces and regalia.

 
ITEMS WANTED

 Wanted - A spinnaker for a Super Seal 26 - posted June 08

Please contact David Oliver at

or on 01822  853960

 

Wanted - Complete sprayhood either used or new with aluminium frame for a seal 22  - Posted March 2007

Please contact Jesper at

 

Wanted - Cruising chute suitable for a Parker 275  - posted Oct 2006

Contact Barbara Reeves

Wanted: Main for Seal 22, New or excellent second hand condition. Posted Nov 2005


Main gone so baggy I now do my shopping with it.
Can anyone recommend a good supplier?
Are 'Bruce Banks' still manufacturing? Have you dealt with them? If so do they offer a range of materials and options eg Dacron, etc.
Am getting astronomical quotes here in Cork, am prepared to travel, and haggle over copious amounts of Guinness.
Contact

Wanted Seal 22 rudder & tiller

suitable for Baker built No 128.   Alternatively working drawings for manufacture.   Help! 'we're up the creek without a rudder'

Contact Mike Ingle 01243 430584 or